8/22/2023 0 Comments Samsung micro usb to hdmi versions![]() This version also added support for stereoscopic 3D and a new micro HDMI connector, both of which didn’t really catch on. It also included an HDMI Ethernet Channel (HEC), which included a 100-Mbit/s ethernet connection between the two HDMI-connected devices and an audio return channel or ARC. In 2009, the next version of HDMI arrived with similar resolution support, including 4K and cinema or ‘true’ 4K, which is 4096x 2160 at only 24Hz but a wider aspect ratio. Like 1.2, this one also saw a mid-cycle update with version 1.3a, which again had similar CEC updates and some modifications to the smaller type-c connector. HDMI 1.3 also introduced a new Type-C Mini HDMI connector (more on that later). This version also had support for increased color spaces and optional support for Dolby TrueHD and DTS-HD Master Audio. It also added support for 10-bit, 12-bit, and even 16-bit color depth, depending on the resolution. Additionally, it also added support for 4K or 2160p at 30Hz, although it wasn’t made official until the release of HDMI 1.4. First of all, it finally doubled the bandwidth to 10.2Gbps, which bumped up the ability to deliver 720p resolution at 240Hz, 1080p at 120Hz, and 1440p 60Hz. This was a big leap for the standard when it launched in June 2006. In 2005 itself, HDMI 1.2a was announced, which added compliance for Consumer Electronics Control (CEC), allowing multiple HDMI devices to control each other with one remote controller. This version was originally intended to derestrict formats to increase compatibility and compete with the new and emerging Display Port interface. It also added support for some newer color spaces. HDMI 1.2 and 1.2aĪrriving almost a year after HDMI 1.1, HDMI 1.2 was an important update as it included compatibility for low voltage devices, making it suitable for PCs (especially graphics cards). ![]() The resolution and refresh rate specifications remained the same. The only new feature added was DVD-Audio support, which meant that HDMI could now deliver audio ranging from single-channel mono to 5.1-channel surround sound. Making its first appearance in May 2004, HDMI 1.1 was a very small update to the existing HDMI 1.0 standard. The standard also supported 8-channel audio. It offered a data transfer rate of 4.9Gbps to deliver 720p resolution at 120Hz, 1080p at 60Hz, and 1440p at 30Hz. It primarily used a similar architecture as DVI for sending video signals but sent audio and other data during a video stream's blanking intervals. The first version of the HDMI spec arrived in December 2002. Much like USB, different specifications can be matched to different connectors/ports. First make sure whether your laptop is a "micro" or "mini" version of the port (because that's different) and then search for the adapter you need, for instance: HDMI to micro HDMI adapter.Here, we have explained all the different versions of the HDMI specification that have been launched over the years, along with a quick look at the type of HDMI connectors. The final type of adapter you might need, and this typically only applies to laptops, is one that converts to a mini or micro version of the same type of cable. For instance, if you use a VGA cable and use an adapter to plug it into the HDMI port, it will still only be able to transmit a VGA signal, which is much inferior. ![]() When you are using an adapter, the quality of your connection will be limited to the strength of the weakest link in the chain. Some adapters are very small, some are longer and called dongles, and some replace the entire cable and simply have different plugs on either end. If you use DisplayPort instead, you would instead search for a USB-C to DisplayPort adapter, and so forth. You can find the correct adapter or dongle by looking for one which contains the two types of connections you need, and the word "adapter." For instance, one of the most common is a USB-C to HDMI adapter for Macs and laptops. If the port on the monitor and the port on your PC, Mac, or laptop do not match, then you will need an adapter or dongle in order to connect the two. Other than that exception, you will get the best experience by using the least amount of adapters possible and by using the latest and best type of cable possible. (This is typically either HDMI or DisplayPort depending on the model. For instance, some monitors can only perform at their maximum settings (like refresh rate) when connected with a specific type of cable. ![]() Which cable you use to connect to the monitor will determine how well it is able to perform.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |